TOOLTEC LTD                                                                      


UNIT TWO  |  STRAIK ROAD  |  ELRICK                            

WESTHILL  |  ABERDEEN  |  AB32 6TJ


01224 279411  |  07703 812602  |  sales@tooltecltd.com


Company  No - SC444904   |   VAT Reg No - 162280623





Contact Details

Subsea 7

Proserv

Hydrasun

ROVOP

i-Tech

Bibby Offshore

Ashtead Technology

Dof Subsea

Recent Clients

Mail: sales@tooltecltd.com?subject=Website Enquiry

ToolTec

Tooltec are Aberdeenshire based remote intervention specialists, who deliver world class remote intervention equipment, designed and built for all subsea conditions.  Vastly experienced remote intervention manufacturers and suppliers to the global Subsea Oil and Gas industry.

ROV Tooling

You are here:

3 Way Zero leak Locking Hot Stabs

ToolTec’s 3-Way Zero Leak Hotstabs (Mechanically Actuated stab system utilises a set of subsea rated wet-mate flat faced couplers, which when pushed together by the ROV, automatically connect and mechanically lock together. The stab will then remain mated and locked together, until the ROV physically pulls on the ROV handle, effecting the unlock and de-coupling of the hydraulic connections. This arrangement assures a near zero leak criteria, with less than 0.1mL ingress/discharge per line during each make/break operation.  

Product Details

Manual Low Torque Tool (API 17D, ISO 13628-8

Class 1-4)

The Manual Torque Tool is designed to allow the ROV manipulator operation of API 17D, ISO 13628-8 Class 1-4 rotary torque interfaces. The tool limits the torque that can be transmitted from the ROV manipulator to the valve stem during an ROV intervention operation, mitigating against the possibility of excessive torque being applied, ensuring damage to the valve does not occur.  


Product Details

Compliant Mount

ToolTec have developed a flexible complaint tool mount to give a controlled compliance between the tool being used and the ROV manipulator in operation. It is completely failsafe due to the integral mechanical link between the flanges such there is no potential for the tool to be lost by failure of the flexible element within the compliant mount.

Product Details
Compliant Mount Manual Torque Tool 3 Way Zero leak Locking Hot Stabs 3 Way Zero leak Locking Hot Stabs Compliant Mount
Launch Datasheet
T0024-DAT-03-Rev1 - Manual Torque Limiting Torque Tool (ISO 13628-8 Class 1-4).pdf
Launch Datasheet
P0090-DAT-01-Rev1 - 3-Way Zero Leak Mechanically Actuated Locking Hotstab.pdf
Launch Datasheet
T0010-DAT-01-Rev3 - Compliant Mount.pdf

Manual Low Torque Tool (API 17H TYPE A, B & C)

The Manual Torque Tool is designed to allow ROV manipulator operation of API 17H type A or B low torque rotary valve interfaces. The tool features an adjustable torque limiting clutch mechanism, which acts to limit the maximum torque that can be transmitted from the ROV manipulator to the valve stem during an ROV intervention operation, mitigating against the possibility of potentially over-torqueing and damaging a valve.

Product Details
Manual Low Torque Tool (API 17H TYPE A & B) Manual Low Torque Tool (API 17H TYPE A & B)
Launch Datasheet
T0024-DAT-01-Rev3 - Manual Low Torque Tool (API 17H Type A B  C).pdf

ROV Operated ball Valve

ToolTec can supply standard design or bespoke variations of ROV actuation interfaces for the operation of hydraulic ball valves by ROV, either by manipulator or via a suitable torque tool.

Product Details
ROV Operated Ball Valve
Launch Datasheet
T0011-DAT-01-Rev1 - ROV Operated Ball Valve ISO 13628-8 Type A.pdf ROV Operated Ball Valve Manual Torque Tool

Manual Low Torque Tool  Smart Socket

(API 17D, ISO 13628-8 1-4)

The Manual Torque Tool is designed to allow ROV manipulator operation of API 17D ISO 13628-8 1-4 rotary torqueinterfaces. The tool limits the torque that can be transmitted from the ROV manipulator to the valve stem during an ROV intervention operation, mitigating against the possibility of excessive torque being applied, ensuring damage to the valve does not occur.  


Product Details
Manual Torque Tool Smart Socket
Launch Datasheet
T0024-DAT-02-Rev1 - Manual Torque Limiting Torque Tool, Smart Socket (ISO 13628-8 Class 1-4).pdf Manual Torque Tool Smart Socket

Heavy Duty Docking Probe to ISO 13628-8

The ToolTec heavy duty docking probe (latch) is used subsea for a variety of purposes; typical examples are for thesecure docking of Tooling Deployment Units (TDU) onto subsea hardware, ROV docking onto subsea structures and large surface deployed tooling such as ROV drills.

Product Details
Heavy Duty Docking Probe Heavy Duty Docking Probe
Launch Datasheet
T0001-DAT-01-Rev1 - Docking Probe ISO 13628-8.pdf

Surface Torque Verification Unit

The surface verification unit (deck analyser) is a portable device to allow accurate torque verification against a calibrated torque transducer.  The unit is manufactured form aluminium making it lightweight and easy to handle.  It can provide torque verification up to 3000 Nm which enables it to cover ISO 13628-8 Clas 1 to 4 torque range

Product Details
Surface Torque Verification Unit
Launch Datasheet
T0026-DAT-01-Rev2 - Surface Torque Verification Unit (ISO 13628-8 Class 1 to 4).pdf Surface Torque Verification Unit

ROV Handles

ToolTec standard ROV handles are the ideal choice for operators, as they are suited to intermeshing and parallel manipulator jaws.  These robust handles are manufactured from stainless steel and xylan coated orange to provide easy visual identification.

Product Details
Rov Handles Rov Handles
Various Datasheets
Rov Handles